Multi-use Cutters
Bolt on to cutter holders and can be rotated 2-4 times prior to replacement.
Cutter Holders
Can be individually replaced allowing user to change number of active cutters or remove & replace as needed.
Reusable Anvils
Adjustable to maintain optimal cutting tolerances. Anvils can be flipped and reused prior to replacement.
Patented SSP
Severe Shock Protection [SSP] protects drive system in the event that the shaft stop.
Removable Screen
A wide rand of screens are available with various holes sizes and configurations to optimize particle size.
Easy Maintenance
Designed with "tool-less" access to cutting chamber make service and maintenance safe and easy.
Direct Drive
Simple and efficient drive with not belts to maintain.
Details
The Uni-Shear® SR900F is the premier finishing solution for high-volume processors. It is engineered to handle secondary processing of RDF (Refuse Derived Fuel), tire wire, and large-scale electronics recycling. With throughput rates reaching up to 25 tons per hour, the SR900F allows for complete start-to-finish sizing solutions when paired with primary SSI shredders.
Videos
No related videos.
Specifications
| Shredder Model | Uni-Shear® SR900F |
|---|---|
| Drive | In-line direct-drive |
| Number of Motors | |
| Power (Range) | 300 kW (400 hp) |
| Voltage | 460/3/60 standard; other options available |
| Voltage Options | |
| Autochop Feature | |
| Shock Load Protection | |
| Cutter Thickness (nominal) | |
| Cutter Diameter | |
| Cutter Material | |
| Shaft Diameter | |
| Number of Cutters | |
| Rotor Diameter | 880 mm (34.7 in) |
| Rotor Speed (rpm) | |
| Screen Sizes | 12 to 75 mm (½ - 3 in) |
| Active Rotor Length | |
| Cutting Chamber (WxL) | 2,075 x 1,040 mm (81.75 x 41 in) |
| Hopper Capacity | |
| Machine Length | Layout dependent |
| Machine Width | Layout dependent |
| Machine Height | Layout dependent |
| Machine Weight | 27,600 kg (60,000 lbs) |
| Hydraulic Ram | |
| Hopper Opening | |
| Hopper Height | |
| Stand Height | |
| HPU Configuration | |
| HPU Dimensions | |
| HPU Weight |
Finisher output
